load development on my 1000 yd toy

[42769vette]

i finally got a non windy day to test some reloads of my win model 70. i like the fact that it seams to like the hotter powder. a few of these shots are my fault due to the new trigger that im not usto yet. all shots are at 100 yds with a super sniper 20 scope (http://ingunowners.com/forums/access...tml#post651379).

all these reloads are with n-150 powder and unfired remington brass i didn't even size. i just primed chamfer-deburred and loaded.


this is with 36 gr powder and the group measured .79



this is with 36.5 gr and the group measured .78


this is with 37 gr and the group measured 1"


this is with 37.5 gr and the group measured .65



this is with 38 gr and the group measured .1 and i screwed up on one making it 1.2 the top hole is 2 shots


this is with 38.5 and the group measured 1.06



this is with 39 and the group measured .5



this is with 39.5 and the group measured .5 except where i screwed up and it measured 1.5


this is with 40 gr and measured .22 but i screwed up and made it 1.0




i should defintally get enough rep after this thread for a gold bar