Sig P220

roughthumbs · 03-04-2009

I'm not much of a pistol man. Don't get me wrong I enjoy all types of firearms but prefer shotguns and rifles for hunting. I inherited 30 or so pistols and have only shot one. I have Lugers that my Gramps brought back along with some p38's and a switch and signal colt and newer stuff like a pair of stainless colt commanders and 4 beretta 92f's in the box that haven't been shot, a couple vaquero's a red hawk or black hawk or both. I think I also have a colt mustang, ruger single six and a hodge podge of other pistols. Out of everything listed above I have only shot one of the Lugers.

So here is my question is a Sig p220 in 9mm para a good deal for $225? I heard that this is a pretty rare configuration. It says made in Germany under the barrel in front of the trigger guard. It is definitely worn shows a lot of holster wear and the grips are getting pretty smooth. I like a deal and I could see my self using this for home protection and range fun. All of the other pistols I have were my dad's and I would just feel horrible if I damaged them or modified them to my likings. Again I am definitley NOT new to guns I have been an avid hunter shooter collector for 24 of my 35 years.

VN Vet · 03-05-2009

I recommend you do some research on the P220 price. Your price sounds way low to me. Check out Gunbroker.com and the Sigforum.com for prices.

Please tell me more about your Lugers and P38s. Pictures would be cool also.

Thanks.

homeless · 03-05-2009

The 220 was originally chambered in 9mm. It was a service pistol for the swiss military and some european police agencies. There has been an influx of the euro version recently.

Also it should say "made in W. Germany" that is a pretty good price, just make sure to inspect it before you buy it. Look at the internal surfaces the lockup, the barrel (inside and out) check the smileys they will tell you how much use it has had. If you can get over the euro style mag release (grip heel) then just grab a parts kit, send it off to CCR and slap some new grips on her and she will run like a champ. Just be careful about the holster wear, the stamped slides are made from carbon steel and will rust, so look for pitting.

sigforum.com

052.5GT · 03-05-2009

Quote:

Originally Posted by roughthumbs

I'm not much of a pistol man. Don't get me wrong I enjoy all types of firearms but prefer shotguns and rifles for hunting. I inherited 30 or so pistols and have only shot one. I have Lugers that my Gramps brought back along with some p38's and a switch and signal colt and newer stuff like a pair of stainless colt commanders and 4 beretta 92f's in the box that haven't been shot, a couple vaquero's a red hawk or black hawk or both. I think I also have a colt mustang, ruger single six and a hodge podge of other pistols. Out of everything listed above I have only shot one of the Lugers.

So here is my question is a Sig p220 in 9mm para a good deal for $225? I heard that this is a pretty rare configuration. It says made in Germany under the barrel in front of the trigger guard. It is definitely worn shows a lot of holster wear and the grips are getting pretty smooth. I like a deal and I could see my self using this for home protection and range fun. All of the other pistols I have were my dad's and I would just feel horrible if I damaged them or modified them to my likings. Again I am definitley NOT new to guns I have been an avid hunter shooter collector for 24 of my 35 years.

Do tell about these Lugers. How many do you have, would you ever consider getting rid of one. My brother has been looking for one for about 15 years and not many are out there for sale with a reasonable price. I would love to make his dreams come true and get one for him.

42769vette · 03-05-2009

to be honest 225 for a sig 220 sounds stolen cheep.

clt46910 · 03-05-2009

Way low ball price for such a gun.

roughthumbs · 03-05-2009

The P220 is at a gun shop so I know it's not stolen. I am about 99% sure that it ONLY says made in Germany.

What are the "smileys"?

I'm sorry but all of the guns listed above have sentimental value and therefor I cannot part with them. I will try to get some pictures on here of them someday. But 1st I have to get my wife to show me how. So far I have only been a buyer here but soon hope to be a seller also. Thanks for all of the info I think I will go get the Sig.

Colt556 · 03-05-2009

You sir, are a lucky bastard to inherit so many nice guns! The Sig 220 is a fine pistol and $225 is a steal. The 9mm is less desireable than the .45, most often seen, or the rare .38 Super. It's a well made and well designed gun. Just my $.02. Uhhh, if you pass on it PM me! Lol....

cosermann · 03-05-2009

I'm assuming the P220's in 9mm were also single stack? If so, that's a lot of pistol for not much capacity in terms of rounds carried.

Colt556 · 03-05-2009

Quote:

Originally Posted by cosermann

I'm assuming the P220's in 9mm were also single stack? If so, that's a lot of pistol for not much capacity in terms of rounds carried.

Yeah, they are only 8-9 shot I believe. That's one reason they never sold well here. I have 2 .38 Super mags for one somewhere. The 225 (P6) is a much better option. But for $225 you can't go wrong, well unless it's been abused or shot to hell!

03-04-2009	#1 (permalink)
roughthumbs Plinker Join Date: Jan 2009 Location: Fort Wayne Posts: 82	Sig P220 I'm not much of a pistol man. Don't get me wrong I enjoy all types of firearms but prefer shotguns and rifles for hunting. I inherited 30 or so pistols and have only shot one. I have Lugers that my Gramps brought back along with some p38's and a switch and signal colt and newer stuff like a pair of stainless colt commanders and 4 beretta 92f's in the box that haven't been shot, a couple vaquero's a red hawk or black hawk or both. I think I also have a colt mustang, ruger single six and a hodge podge of other pistols. Out of everything listed above I have only shot one of the Lugers. So here is my question is a Sig p220 in 9mm para a good deal for $225? I heard that this is a pretty rare configuration. It says made in Germany under the barrel in front of the trigger guard. It is definitely worn shows a lot of holster wear and the grips are getting pretty smooth. I like a deal and I could see my self using this for home protection and range fun. All of the other pistols I have were my dad's and I would just feel horrible if I damaged them or modified them to my likings. Again I am definitley NOT new to guns I have been an avid hunter shooter collector for 24 of my 35 years.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTT Sig Sauer P220 ST 45auto	FordMan08	Firearms	14	01-25-2009 20:55
wtt sig p220	ruger7722	Firearms	9	12-15-2008 19:38
WTS MS VM2 IWB for G19 and Sig P220/226R	nofear	Parts and Accessories	2	11-20-2008 05:23
WTT two SIG P220R mags for a regular P220 mag	Bluedragon	Parts and Accessories	0	07-02-2008 12:32
Opinions on P220 Sig?	breakinparts	Handguns	22	03-19-2008 04:57

03-05-2009	#2 (permalink)
VN Vet Expert Join Date: Aug 2008 Location: Eastside of Indy Posts: 1,199	I recommend you do some research on the P220 price. Your price sounds way low to me. Check out Gunbroker.com and the Sigforum.com for prices. Please tell me more about your Lugers and P38s. Pictures would be cool also. Thanks.

03-05-2009	#3 (permalink)
homeless Marksman Join Date: Nov 2008 Posts: 448	The 220 was originally chambered in 9mm. It was a service pistol for the swiss military and some european police agencies. There has been an influx of the euro version recently. Also it should say "made in W. Germany" that is a pretty good price, just make sure to inspect it before you buy it. Look at the internal surfaces the lockup, the barrel (inside and out) check the smileys they will tell you how much use it has had. If you can get over the euro style mag release (grip heel) then just grab a parts kit, send it off to CCR and slap some new grips on her and she will run like a champ. Just be careful about the holster wear, the stamped slides are made from carbon steel and will rust, so look for pitting. sigforum.com

03-05-2009	#5 (permalink)
42769vette Master Join Date: Oct 2008 Location: south of richmond in Posts: 2,861	to be honest 225 for a sig 220 sounds stolen cheep.

03-05-2009	#6 (permalink)
clt46910 Expert Join Date: Dec 2008 Location: Akron Indiana Posts: 1,060	Way low ball price for such a gun.

03-05-2009	#7 (permalink)
roughthumbs Plinker Join Date: Jan 2009 Location: Fort Wayne Posts: 82	The P220 is at a gun shop so I know it's not stolen. I am about 99% sure that it ONLY says made in Germany. What are the "smileys"? I'm sorry but all of the guns listed above have sentimental value and therefor I cannot part with them. I will try to get some pictures on here of them someday. But 1st I have to get my wife to show me how. So far I have only been a buyer here but soon hope to be a seller also. Thanks for all of the info I think I will go get the Sig.

03-05-2009	#8 (permalink)
Colt556 Marksman Join Date: Feb 2009 Location: Indy Posts: 651	You sir, are a lucky bastard to inherit so many nice guns! The Sig 220 is a fine pistol and $225 is a steal. The 9mm is less desireable than the .45, most often seen, or the rare .38 Super. It's a well made and well designed gun. Just my $.02. Uhhh, if you pass on it PM me! Lol....

03-05-2009	#9 (permalink)
cosermann Expert Join Date: Aug 2008 Posts: 1,607	I'm assuming the P220's in 9mm were also single stack? If so, that's a lot of pistol for not much capacity in terms of rounds carried.