llama 45

typhoon · 07-04-2009

does any one know where you can grips for a llama mini-max45? i found a houge grip for a colt comander almost fit maybe with a little cutting. thanks

dice dealer · 07-04-2009

I'd like to find some myself , love the lil gun but would like some nicer grips .

Claddagh · 07-05-2009

IMO, the places to check first would be Midway USA and Brownell's. If anyone makes a set specifically for your Llama (and that might be a largish "if") it'd most likely be listed there.

Your best bet might be Numrich. They specialize in obsolete, discontinued and otherwise hard-to-find parts and accessories. If they don't have something that'd work, chances are you'll have to either adapt a set for another make or go custom.

If you don't insist on neoprene or fancy wood, most custom oufits will make you a set for about anything you could name for a surprisingly reasonable cost. Make a few calls or emails for definitive info. Google is our friend.

RH822-A · 07-05-2009

Try these guys, I have never done business with them but I remembered seeing them when I was looking for grips for my Llama Max I 45.
Llama / Firestorm

RH

techres · 07-05-2009

There are ones on ebay just for it. Hit and miss, as is just about everything for the llama's goes. At least they would be closer to functional than normal 1911 grips. I even tried using Kydex at one point...

menzzer37 · 08-27-2009

You can easily modify grips to work or retap the frame. I did it on a full size. The safety detent screws need to be clearanced on the grips.

07-04-2009	#1 (permalink)
typhoon Plinker Join Date: Dec 2008 Posts: 50	llama 45 does any one know where you can grips for a llama mini-max45? i found a houge grip for a colt comander almost fit maybe with a little cutting. thanks

07-04-2009	#2 (permalink)
dice dealer Sharpshooter Join Date: Dec 2008 Location: southern harrison county Posts: 958	I'd like to find some myself , love the lil gun but would like some nicer grips . __________________ This is were my signature was before the new rules

07-05-2009	#5 (permalink)
techres Building Bridges Between Ammo Forts Join Date: Mar 2008 Location: Bloomington Posts: 3,950	There are ones on ebay just for it. Hit and miss, as is just about everything for the llama's goes. At least they would be closer to functional than normal 1911 grips. I even tried using Kydex at one point... __________________ Appleseed Rifleman & Instructor INGO Moderator Husband & Father of Three

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Llama Looking Friend	Bazooka Joe71	Break Room	20	06-18-2009 21:14
the llama 45 compact	bselzer	Handguns	6	05-17-2009 17:22
WTS Llama Compact .45	Apokalypsi	Firearms	19	05-03-2009 16:39
Considering a Llama .45...anyone know about these?	pheenix42	Handguns	20	10-25-2008 12:29

07-05-2009	#3 (permalink)
Claddagh Plinker Join Date: May 2008 Posts: 214	IMO, the places to check first would be Midway USA and Brownell's. If anyone makes a set specifically for your Llama (and that might be a largish "if") it'd most likely be listed there. Your best bet might be Numrich. They specialize in obsolete, discontinued and otherwise hard-to-find parts and accessories. If they don't have something that'd work, chances are you'll have to either adapt a set for another make or go custom. If you don't insist on neoprene or fancy wood, most custom oufits will make you a set for about anything you could name for a surprisingly reasonable cost. Make a few calls or emails for definitive info. Google is our friend.

07-05-2009	#4 (permalink)
RH822-A Plinker Join Date: May 2008 Location: Pleasant Lake, Steuben County Posts: 111	Try these guys, I have never done business with them but I remembered seeing them when I was looking for grips for my Llama Max I 45. Llama / Firestorm RH

08-27-2009	#6 (permalink)
menzzer37 Plinker Join Date: Aug 2009 Posts: 57	You can easily modify grips to work or retap the frame. I did it on a full size. The safety detent screws need to be clearanced on the grips.