Ruger P95DC jammed

[Skoges69302]

i dissasemble my p95dc and reassembled it, and now my camblock is sticking out the front of the gun and now the slide stop assembly won't go in and i can't re-dissasemble the gun to fix it. It is jammed. I can pull the slide back but it doesn't open to display where the bullet should be. Please help, i need to re-dissasemble it to try and fix the problem

[Skoges69302]

GOT IT! found a post where a guy had the same problem. Had to put a bent wire up to pull the part down that you push down to dissassemble it, and had to hold it down, while pulling forward on the slide and it came right apart. Thank God someone else had the same problem! but it's fixed! anyways, thank you for checking my post

[IndyGunworks]

[Bisley Man]

Don't know if this is your problem, one time I re-assembled my P-95DC and the slide jammed up. On my field-stripped pistol, when the hammer is cocked, the trigger can lift up and out of its slot. If you re-assemble the pistol this way, you'll have trouble working the slide. If this happens, check the trigger and see if it seems high into the frame. Try to work the trigger down into its slot,while working the slide back and forth if needed.Using a wire or some tool to lower the ejector as the Scoges69302 described could be needed as well.

[emmitsmithxd9]

Wow, I have never seen this happen. Thanks for posting this just in case this happens to me in the future.

[Cygnus]

OK. It's an assembly issue.

I knew the title of the thread could not be true....


Sounds like the OP had the extractoer flipped up into the "regular" postion. On these guns you push the extractor down(by reaching into the breach) so it's out of the way for disassembly. When you put the gun back together you insert an empty mag as the final step to put the extractor back in it's functional position. I could see the problem the OP had happening if he inadvertantly knocked the extractor into the regular position before reassembly. Although I don't know how you get the slide fully on. I could see it getting stopped at the point of where the extractor is. Did you force it ?

He kinda says this in hissecond post. AllI ask is how did you get it past the extractor. Does it function OK now?

[Centerfire]

I was teaching my son how to field strip my P95DC and he managed to jam it.
He had slid the slide on just a bit cockeyed. It only took a moment to fix it. No wire required.