WTS 16" Old Town canoe

Cpt Caveman · 06-22-2009

I've got a 16 foot Old town canoe to sell. Its the discovery 158 model made with cross link 3. Wood needs a little refinishing, but all in all it is in pretty good shape.

<<<***price drop***>>> Looking for $300.

Still willing to consider trade offers. Please don't be afraid to make me an offer , worst I can say is" No thanks".
I will entertain firearm trade offers . Pm with questions. Location is near Nashville In. Obviously, you'll have to pick it up.

Thanks folks

Joe Williams · 06-22-2009

Can it seat three?

riverman67 · 06-22-2009

How many can it seat , weight limit ??Can you send pics to my email Thanks

Cpt Caveman · 06-22-2009

It has two seats. I used to set a 6x6 block for my son to sit on in the middle. I'll get you some pics.
I believe the weight limit is over 900#, 980, I think.

Cpt Caveman · 06-22-2009

Vigilant · 06-27-2009

The top pic shows what appears to be a large dent and a smaller dent, then maybe a patch? of a different color green, is that the case? If so, is therre any cracking around the dent areas?

Cpt Caveman · 06-28-2009

The two " dents" as you called them aren't dents at all. They are just the way the crosslink3 expands in the sun. Thats the way it has always been, the large "dent" pops down when its turned over. The darker section on the right side of the first pic is water that ran on it from the hollow handle of one of the paddles when I flipped it over. The dark strip down the far end is a factory drag reinforcement. They put those on the back end of the keel so when you drag 'em through shallow rocky creeks you don't wear a hole in the bottom.
The small " dent" was a place where two of the three layers had separated. I asked the company what the proper fix was and they said drill a hole, fill a syringe with epoxy, force some in and clamp it together. Its been fine ever since.

Cpt Caveman · 06-29-2009

I'd consider a 22 lr conversion kit for a glock 17 and a couple magazines as a trade for the canoe.

Cpt Caveman · 07-04-2009

Bump with price drop.

Cpt Caveman · 08-16-2009

Another bump.....

06-22-2009	#1 (permalink)
Cpt Caveman Plinker Join Date: Feb 2009 Location: Brown County Posts: 297	WTS 16" Old Town canoe I've got a 16 foot Old town canoe to sell. Its the discovery 158 model made with cross link 3. Wood needs a little refinishing, but all in all it is in pretty good shape. <<<*price drop>>> Looking for $300. Still willing to consider trade offers. Please don't be afraid to make me an offer , worst I can say is" No thanks". I will entertain firearm trade offers . Pm with questions. Location is near Nashville In. Obviously, you'll have to pick it up. Thanks folks Last edited by Cpt Caveman; 08-18-2009 at 16:26.*

06-22-2009	#5 (permalink)
Cpt Caveman Plinker Join Date: Feb 2009 Location: Brown County Posts: 297	Pictures

06-29-2009	#8 (permalink)
Cpt Caveman Plinker Join Date: Feb 2009 Location: Brown County Posts: 297	I'd consider a 22 lr conversion kit for a glock 17 and a couple magazines as a trade for the canoe. Last edited by Cpt Caveman; 07-06-2009 at 06:43.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Galveston planning a town court" to bring money to the town	4sarge	Politics, Laws and 2nd Amendment	1	05-12-2009 06:16
WTB canoe cart	clt46910	Want to Buy	3	03-26-2009 15:31
WTS-WTT 14' Canoe	public servant	Non-Firearms Related	18	03-20-2009 13:29
WTS--Grumman canoe	townmarshal	Non-Firearms Related	0	02-15-2009 08:42
Chicago "STOP THE VIOLENCE" town hall meeting	melensdad	Politics, Laws and 2nd Amendment	6	05-13-2008 08:07

06-22-2009	#3 (permalink)
riverman67 Not just a plinker Join Date: Jan 2009 Location: Mooresville Posts: 150	How many can it seat , weight limit ??Can you send pics to my email Thanks

06-22-2009	#4 (permalink)
Cpt Caveman Plinker Join Date: Feb 2009 Location: Brown County Posts: 297	It has two seats. I used to set a 6x6 block for my son to sit on in the middle. I'll get you some pics. I believe the weight limit is over 900#, 980, I think.

06-27-2009	#6 (permalink)
Vigilant Marksman Join Date: Jul 2008 Location: Plainfield Posts: 478	The top pic shows what appears to be a large dent and a smaller dent, then maybe a patch? of a different color green, is that the case? If so, is therre any cracking around the dent areas?

06-28-2009	#7 (permalink)
Cpt Caveman Plinker Join Date: Feb 2009 Location: Brown County Posts: 297	The two " dents" as you called them aren't dents at all. They are just the way the crosslink3 expands in the sun. Thats the way it has always been, the large "dent" pops down when its turned over. The darker section on the right side of the first pic is water that ran on it from the hollow handle of one of the paddles when I flipped it over. The dark strip down the far end is a factory drag reinforcement. They put those on the back end of the keel so when you drag 'em through shallow rocky creeks you don't wear a hole in the bottom. The small " dent" was a place where two of the three layers had separated. I asked the company what the proper fix was and they said drill a hole, fill a syringe with epoxy, force some in and clamp it together. Its been fine ever since.

07-04-2009	#9 (permalink)
Cpt Caveman Plinker Join Date: Feb 2009 Location: Brown County Posts: 297	Bump with price drop.

08-16-2009	#10 (permalink)
Cpt Caveman Plinker Join Date: Feb 2009 Location: Brown County Posts: 297	Another bump.....