442 Shooters Pack Springs? Need help.

[blamecharles]

I am planning on buying a set of springs for my girlfriends 442 airweight. Here is the set i am thinking about:

Shooters Pak - Reduced Power - Stock Number 17125 - This pak for centerfire models contains 1 each 8 pound reduced power hammer spring and 1 each 13, 14 and 15 pound reduced power rebound springs allowing adjustment for lighter and smoother trigger and hammer action. May go with the 9 also still trying to decide.

The reason for this is she is very small and has a tough time pulling the trigger on the 442. As i watched her firing over the weekend i could see the barrel going up and down as she pulled the trigger. Part of this was anticipation but most of it was the trigger pull. I wanted to see if anyone else had experience with this pack and could share their experience.

 

[Cam]

I've used this spring kit in a couple different J-frames and had good success with them. I'd say buy with confidence. They are also fairly easy to install. Makes a big difference in trigger pull.

 

[blamecharles]

I've used this spring kit in a couple different J-frames and had good success with them. I'd say buy with confidence. They are also fairly easy to install. Makes a big difference in trigger pull.

Thank you.

 

[Sullivan_pbr]

I used one of those kits in my Taurus 605. It made a huge difference, I would highly recommend it.

 

[blamecharles]

Well i went ahead and ordered them thanks for the input. I guess i will turn this into a how to thread once i receive the springs.