Some of you may remember I had a hammer follow issue on my new Para GI LTC. Well after a trip to the LGS for a fix it seemed to be fixed....it wasnt. Had a buddy look at it and it turns out it had a bad sear (MIM part). So instead of sending it off to Para for an undetermined amount of time I ordered up the parts myself and had a buddy install them.
Parts ordered were an Ed Brown Sear, Hardcore barstock hammer and a Wilson full length guide rod with Shock Buffs and upp'd firing pin spring. Buddy even tightened up the tension on the back strap safety to eliminate some "rattle" in it. I have not put any rounds thru it since the fix but here are a couple pics.
Plan on getting SS parts for the Slide stop, thumb safety, trigger and Mag release to finish dressing her up.
Kevin
Parts ordered were an Ed Brown Sear, Hardcore barstock hammer and a Wilson full length guide rod with Shock Buffs and upp'd firing pin spring. Buddy even tightened up the tension on the back strap safety to eliminate some "rattle" in it. I have not put any rounds thru it since the fix but here are a couple pics.
Plan on getting SS parts for the Slide stop, thumb safety, trigger and Mag release to finish dressing her up.
Kevin
