A cartridge with a long and flexible history, it begins in Colt Richards cartridge conversions like the old revolver in the top of the photo, using the cartridge on the left. It uses a heeled bullet to allow it to both fit in what was an 1860 sized cylinder, but sized at .454 to allow it to fit what was an 1860 barrel. The rim is smaller than say a 44 special, Russian or Magnum, but the cartridge diameter is the same.
Fast forward to modern times and Cimmarron starts importing Richard conversion copies. There are different versions of these to be aware of. Early ASM guns, the long barreled revolver in the picture, actually need the 44 Colt case to work, but the barrels are .429, the modern diameter of this family, and do not used a heeled bullet. The cartridge in the middle is the 44 Colt case with a cast .430 lead bullet installed just like any other.
Later Cimmarron imports like the Uberti on the left dispense with the requirement for the 44 Colt and will take Russian or Specials, you can put 44 Colt ammo in these guns if you want.
The cartridge on the right is a 44 Special.
Fast forward to modern times and Cimmarron starts importing Richard conversion copies. There are different versions of these to be aware of. Early ASM guns, the long barreled revolver in the picture, actually need the 44 Colt case to work, but the barrels are .429, the modern diameter of this family, and do not used a heeled bullet. The cartridge in the middle is the 44 Colt case with a cast .430 lead bullet installed just like any other.
Later Cimmarron imports like the Uberti on the left dispense with the requirement for the 44 Colt and will take Russian or Specials, you can put 44 Colt ammo in these guns if you want.
The cartridge on the right is a 44 Special.
Last edited: