Cartridge : 9 mm Luger (SAAMI)Bullet : .355, 124, FP Rainier 9mm
Useable Case Capaci: 7.567 grain H2O = 0.491 cm³
Cartridge O.A.L. L6: 1.050 inch = 26.67 mm
Barrel Length : 4.0 inch = 101.6 mm
Powder : Alliant BULLSEYE
Predicted data by increasing and decreasing the given charge,
incremented in steps of 2.0% of nominal charge.
CAUTION: Figures exceed maximum and minimum recommended loads !
Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms
-20.0 74 3.44 943 245 20159 3704 93.3 0.538
-18.0 76 3.53 962 255 21225 3813 94.0 0.524
-16.0 78 3.61 982 265 22328 3921 94.8 0.512
-14.0 80 3.70 1001 276 23470 4027 95.4 0.500
-12.0 82 3.78 1020 286 24650 4130 96.1 0.489
-10.0 84 3.87 1039 297 25870 4232 96.6 0.478
-08.0 86 3.96 1057 308 27131 4331 97.2 0.467
-06.0 87 4.04 1076 319 28433 4428 97.6 0.457
-04.0 89 4.13 1094 329 29779 4522 98.1 0.447 ! Near Maximum !
-02.0 91 4.21 1112 340 31170 4614 98.4 0.438 ! Near Maximum !
+00.0 93 4.30 1130 352 32605 4702 98.8 0.429 ! Near Maximum !
+02.0 95 4.39 1148 363 34088 4789 99.1 0.421 ! Near Maximum !
Oh sweet, that's good to hear. What exactly is QL? Never heard of it before
I'm assuming this tread is about the 9mm Luger round. With that in mind,
My 10th edition Hornady manual lists the following loads for 124gr FP projectiles, but this is jacketed data, NOT plated.
That said, both powders listed are right at or just under 1100fps.
Win Autocomp 124gr FMJ-FP C.O.L. 1.050"
4.2grs= 900fps =starting load
4.4gr= 950fps
4.7gr= 1000fps
4.9gr= 1050fps -This is the MAX load for Autocomp
The load listed below gets you 1350fps and a 165PF , quite fun to shoot in an open gun. The "Max" loading for AutoComp barley gets the guns running right when using compensators. Just random info here. This loading is called 9mm Major which is about ++P+ you have to use new or once fired brass