AR-15 and M-16 Show And Tell

[pyzik]

Good to be BAD by David Pyzik, on Flickr

 

[wsenefeld]

After getting behind the glass of a TA11, I finally found an ACOG that I liked. As soon as I got it on there, I knew the rifle was complete.

 

[NyleRN]

Got #5 put together. Bought a nib PSA 16" middy CHF upper with premium bcg and CH from treeman22 here on the board. Took off the A2 front sight and A2 flash hider and put on an SLR rifleworks synergy bcf comp and SLR rifleworks 14" solo m-lok rail. Then Magpul hand stop and panels. Went OD green this time. Not sure about optics right now.

 

[sgreen3]

I had always wanted to try a 20" build with a carry handle, so I horse traded around for some stuff and this is what came about. PSA 1/7 CHF upper with magpul handgaurd, lower is a Tactical innovations with magpul MOE rifle stock an grip. I have to say for never having a rifle length 20 with irons I kind of like it. Going to take a little practice but I think it will fit right in an may even have to try it out for run n gun a few times.

 

[pyzik]

 

[N_K_1984]

 

[thecolter]

Spent a little time getting back to basics yesterday with my M16A4 clone. Built it just like the first M16 I was issued back 2003.

 

[jblomenberg16]

I like that dissy...

 

[pyzik]

Spent a little time getting back to basics yesterday with my M16A4 clone. Built it just like the first M16 I was issued back 2003.

Nice

 

[Fordtough25]

Love it! Doing something with a Colt A2 upper myself right meow.

 

[Fordtough25]

Spent a little time getting back to basics yesterday with my M16A4 clone. Built it just like the first M16 I was issued back 2003.

Makes me want to get mine out and light up steel right now!!

 

[teddy12b]

Spent a little time getting back to basics yesterday with my M16A4 clone. Built it just like the first M16 I was issued back 2003.

That'll be my next build for sure. Unfortunately I had to sell my last 20" A4 clone. Something about a 20" AR.

 

[EvilKidsMeal]

No. 3
My mutt, budget minded SPR

PSA Stripped lower with PSA OD MOE LPK
Magpul MOE rifle stock OD w/extended recoil pad and Magpul QD socket installed
stock also has a small bottle of RemOil, Hoppes .223 Boresnake, and Magpul front sight tool in it
Anderson stripped upper receiver w/ DS Arms parts kit
PSA FA premium BCG
MEGA Arms 18" 5.56 stainless steel SPR contour barrel
A2 flash hider
YHM low profile pinch type gas block
YHM Rifle length gas tube
DPMS Charging handle with Badger Tactical latch
Magpul MBUS Gen 2 front and rear OD
Weaver SPR thumb nut scope mount (already had)
Vortex Crossfire II 3-9x40 BDC
Midwest Industries T-Series 12" free float quad rail with end cap
Magpul XTM panels OD
Ergo OD ladder rail covers
Troy Industries rail mount QD socket
Grovtec QD swivels
Cheapo Blackhawk 2 point sling
Caldwell XLA 6-9 bipod and rail adapter
Coyote Streamlight PolyTac LED (10 tap version) flashlight in cheapo thumb nut mount, that moves from gun to gun.

Came in right around $1,200

Very anxious to get it out for the maiden

 

[N_K_1984]

Love it! Doing something with a Colt A2 upper myself right meow.

I like that dissy...

Thanks guyz! I love the modern, wild looking ARs but this thing, in all of its simplicity has become an obsession of mine!

Pizzic Thrizzead:

 

[thecolter]

AR family photo...

 

[N_K_1984]

That's a good looking family!

 

[pyzik]

Got bored over the weekend so decided to do some painting.


Rattle Can Multicam by David Pyzik, on Flickr

 

[THE BIG SITT]

Just picked these up last week, and was able to get them out to the range over the weekend. Here is a parts breakdown on both:

SPR:
Upper:
-Recoil Gunworks billet receiver
-UTG Pro 15" Keymod slim handguard
-18" Mega Arms SPR barrel
-Lantac Dragon muzzle break
-Recoil Gunworks NiB BCG
-BCM Mod 3 charging handle
-UTG Pro bipod
Lower:
-Recoil Gunworks billet receiver
-Geissele SD-E trigger
-Magpul MOE+ grip
-Magpul STR stock
Optic:
Vortex Viper HS 2.5-10
Burris PEPR QD mount

Pistol:
Upper:
-Recoil Gunworks billet receiver
-UTG Pro 13" Keymod slim handguard
-10.5" Recoil Gunworks barrel
-KAK Slimline Flash Can
-Recoil Gunworks NiB BCG
-BCM Mod 3 charging handle
-Fortis SHIFT grip (yes, it is over 26" OAL)
Lower:
-Recoil Gunworks billet receiver
-Geissele SD-E trigger
-Magpul MOE+ grip
-SB15 arm brace
-KAK buffer tube
Optic:
Lucid HD7 Gen 3

 

[daddyusmaximus]

Say hello to my little friends...



The long one is camera shy... no scope or sights.

 

[wsenefeld]

Pistol


Double stamp 5.56


Midrange 5.56


.308