Asking for your help...

[VUPDblue]

The next member meeting at MCF&G is this coming Tuesday night @ 7:00pm. It is a very real posibility that we will get Pistol Caliber Carbines allowed full-time at the range after a vote at this meeting. I need two things from my fellow shooters: First, I need some ballistic data on 9mm projectiles fired from a 16" barrel. I have some already, but more is better. I would appreciate a bullet-drop chart too. I can supply the bullet weights and speeds if someone has the ballistic software to run it through. Secondly, I would appreciate any kind of backup at this meeting. If you can attend, being a member or not, please do. I know there are some of you out there that would join the club if this rule change were allowed. TIA,
-Nick

 

[Farmritch]

I Can't remember the speed of my reloads
124 JSP I thought it was around 960?
But I can tell you at 120 - 135 yards the drop is a bit over 8 "
I'm loading 4.6 grains of 7625
and shooting it out of a Marlin camp 9 carbine
I've been using this load for groundhogs at the barn now for 15 years and scope is zeroed at 125 yards

 

[Barry in IN]

There are a couple of ballistic calculators here:
http://www.eskimo.com/~jbm/calculations/calculations.html
I haven't used them in a while, but they were my favorite. You could plug anything in, and get trajectories for all sorts of increments (every 5 yards from 0 to 100 yards; or every 50 yards to 2,000 yds, etc).

 

[VUPDblue]

There are a couple of ballistic calculators here:
JBM - Calculations
I haven't used them in a while, but they were my favorite. You could plug anything in, and get trajectories for all sorts of increments (every 5 yards from 0 to 100 yards; or every 50 yards to 2,000 yds, etc).

Thank you for that link, it'll help a lot.