Bersa's New BP Series

[Roadie]

I am really liking the looks of these.

The single stack = smaller grip is appealing for me since I have fairly small hands, but the reduced capacity (8+1) is the trade off..
From what I have been reading they have been going for around $380. Not bad.

Here's one compared to the .380..

Hmmmm

 

[Indy_Guy_77]

Trying to horn-in on and undercut Kahr... I like it!!!

-J-

 

[crispy]

So... is that LC9 sized? Or is is SR9c sized?

Like to see it compared to those two.

 

[Roadie]

So... is that LC9 sized? Or is is SR9c sized?

Like to see it compared to those two.

In between. Single stack, so narrower than the SR9c..

 

[IndyGunworks]

9mm not 380?

 

[Indy_Guy_77]

9mm not 380?

According to the roll mark in the slide, it's 9mm! (9cc....9mm, conceald carry)

I'm REALLY interested in these! (dang it!)

-J-

 

[Indy_Guy_77]

specs:

BP Concealed Carry

 

[IndyGunworks]

• High Impact Polymer Frame
• Picatinny rail, polygonal rifling & loaded chamber indicator
• Ambidextrous magazine release
• Striker fired
• Micro-polished bore with sharp, deep rifling
• 3-dot sight system
• Integral Locking System
• Automatic firing pin safety
• Lifetime service contract

Looks promising.

 

[Shoots4Fun]

I've always liked Bersa, here's the spec's I found on the web:


9MM Specifications
Model: BP9CC
Caliber: 9MM
Action: Short reset DAO
Capacity: 8+1
Barrel Length:3.3”
Front Sight: Interchangeable Sig Sauer type
Rear Sight: Interchangeable Glock type
Finishes: Matte Black or Duotone
Grips: Integral to frame
Construction: Hi Impact Polymer Frame/Steel Slide
Safety: Integral Locking System, Firing Pin, Trigger
Weight: 21.5 oz.
Length: 6.35”
Height: 4.8”
Width: .94”

40SW Specifications
Model: BP40CC
Caliber: 40SW
Action: Short reset DAO
Capacity: 6+1
Barrel Length:3.3”
Front Sight: Interchangeable Sig Sauer type
Rear Sight: Interchangeable Glock type
Finishes: Matte Black or Duotone
Grips: Integral to frame
Construction: Hi Impact Polymer Frame/Steel Slide
Safety: Integral Locking System, Firing Pin, Trigger
Weight: 21.5 oz.
Length: 6.35”
Height: 4.8”
Width: .94”

 

[Shoots4Fun]

I like the all black model myself...

 

[Indy_Guy_77]

Looks promising.

Agreed!!

I looked through Bersa's online store to see what extra mags were going to cost.

They're not yet listed for sale as extras, however...

I'll hold out hope until the pistols are actually on the shelves + real world pricing + mag cost & availability.

I might give up on my my wish for another Kahr (CW-9) and look at this Bersa instead!

 

[Rambler]

.

 

[Roadie]

According to Bersa Chat the first run had been on the shelves and sold out already. Reviews on the trigger are decent, short reset but gritty. I bet that works itself out with some use.

 

[Indy_Guy_77]

According to Bersa Chat the first run had been on the shelves and sold out already. Reviews on the trigger are decent, short reset but gritty. I bet that works itself out with some use.

You're my go-to Bersa guy, man...

Keep us posted!

Also, see if you can get mag availability & cost info from Bersa Chat...

*wonder how difficult it'd be to meld/meld that rail into a rounded dust cover...*

-J-

 

[IndyGunworks]

You're my go-to Bersa guy, man...

Keep us posted!

Also, see if you can get mag availability & cost info from Bersa Chat...

*wonder how difficult it'd be to meld/meld that rail into a rounded dust cover...*

-J-

shouldnt be hard at all, the only problem is gettin the plastic to match the rest of the frame. but functionally it could be done rather easily as long as its not hollow.

 

[Roadie]

You're my go-to Bersa guy, man...

Keep us posted!

Also, see if you can get mag availability & cost info from Bersa Chat...

*wonder how difficult it'd be to meld/meld that rail into a rounded dust cover...*

-J-

You haven't got it yet and wanting to mod it already!

Haven't heard anything about mags yet. I have read that some of the websites are wrong, and it really comes with 2 mags not one.

It's nice to see the sights are interchangeable, a little weird that one is Sig and the other Glock though..

Very tempting....

 

[88E30M50]

It's nice to see that these are finally out. I'll need to keep my eyes open for one.

 

[shooter521]

We just received (and sold) our first couple of these this week; I didn't even get a chance to put them in a "new arrivals" thread! In handling them, I was fairly impressed with the ergonomics, size, weight and trigger. Price point (low to mid $300s) puts it solidly between the Kel-Tec P11/PF9 and Taurus 709/Kahr CW series. Should be a good option for those looking for a slim, lightweight 9mm carry gun.

 

[Indy_Guy_77]

We just received (and sold) our first couple of these this week; I didn't even get a chance to put them in a "new arrivals" thread! In handling them, I was fairly impressed with the ergonomics, size, weight and trigger. Price point (low to mid $300s) puts it solidly between the Kel-Tec P11/PF9 and Taurus 709/Kahr CW series. Should be a good option for those looking for a slim, lightweight 9mm carry gun.

Very glad you chimed in, Mark!!!

As I've posted up thread: Any idea on spare mag availability and pricing? How many mags are these shipping with?

-J-

 

[Bronsonbull]

This is the Wyatt's Gun Range of guns. Us Bersa fans have been waiting forever for this model to finally be released. Its literally 2 years late after getting hung up with import issues. 400 made it over and most are gone. Cant wait for some range reports.