Conversion barrel for glock 22 gen4

[Mr. Neal]

Wonderin if any fellow INGOers have any experience with conversion barrels in a G22. Mainly meaning 9mm or 357 sig conversion barrels. Can you just replace barrel and shoot or do I need to switch out extractor on 9mm obviously need to switch mags with 9mm. Any advice is appreciated !

 

[VERT]

I have a lone wolf 9mm conversion for my Glock 23 gen3 Works great with factory 9mm mags. Just replace the barrel and shoot.

 

[Mr. Neal]

Thanks for the input VERT! Comeon folks! No one has a g22 with these conversions? Really could use some insight..

 

[lonehand]

Conversion

Used Lone Wolff Barrel , 9 to 40 , same mag.

 

[WebSnyper]

Wonderin if any fellow INGOers have any experience with conversion barrels in a G22. Mainly meaning 9mm or 357 sig conversion barrels. Can you just replace barrel and shoot or do I need to switch out extractor on 9mm obviously need to switch mags with 9mm. Any advice is appreciated !

You could get a factory 357 barrel, and use all your current mags, et, although price of ammo makes 357 a non starter for me.

9mm, yes conversion barrel, and mags.

If you have troubles you could switch the ejector and extractor, but I'd probably try it first without doing that.

 

[VERT]

I have had three of the lone wolf barrels. 2 for a G23 and 1 for a G35. All worked fine. The G35 benefitted from a 15 lb recoil spring. OP go ahead and order s barrel. All is good.

 

[ShootnCut]

I have a factory barrel in .357 SIG for my Gen 3 G22. It works fine but it doesn't shoot to the same point of impact that the .40 barrel does.

 

[VERT]

I have a factory barrel in .357 SIG for my Gen 3 G22. It works fine but it doesn't shoot to the same point of impact that the .40 barrel does.

All three of the 9mm conversions shot the the same point of aim as the factory 40 barrels. At least within 15 yards (which is all the farther I tried them). In fact they grouped tighter then the original 40 barrel. I can't speak for the 357 conversion.

 

[Mr. Neal]

All three of the 9mm conversions shot the the same point of aim as the factory 40 barrels. At least within 15 yards (which is all the farther I tried them). In fact they grouped tighter then the original 40 barrel. I can't speak for the 357 conversion.

Thanks VERT! 9mm is more of what I was lookin into anyway. .357 sig is just something of curiosity.