Shooitng out of a Springfield 1911 A1 Loaded. .45 cal 230 gr plated PowerBond RN over 3.7 gr Clays. Test fired 42 rounds today and the accuracy seemed to be all over the place both rested and free style. No consistent pattern of too low, too high etc. just kind of sprayed. iI'm not the best shot in the world but can usually hold tighter groups with factory ammo.
Any recomendations on the best way to adjust? My first thought was to go down to 3.5 gr of Clays and see if that made a difference as the recoil was not as light as I expected from Clays. There were no feeding,firing, ejection problems with this load and the brass was thrown well clear.
I also have some Winchester WST that I could load with as well as some Bullseye.
Any recomendations on the best way to adjust? My first thought was to go down to 3.5 gr of Clays and see if that made a difference as the recoil was not as light as I expected from Clays. There were no feeding,firing, ejection problems with this load and the brass was thrown well clear.
I also have some Winchester WST that I could load with as well as some Bullseye.
Last edited: