Lyman Tru Line Jr

[Pin]

Anyone ever use one of these Lyman Jr's? Got it from a friend awhile back, never had a 38 special so never used it. Now I have a 38 special, now I'd like to use it. I found the instructions, which didn't help much. Any one have any case lube die they would recommend for older dies? I use one shot, and rcbs case lube. When forming large amounts of brass, lanolin oil with isopropyl alcohol. wasn't sure if these older dies preferred anything, but I did some with one shot and it was rough going. the rcbs was a bit better but still didn't glide like the newer dies. Didn't try the lanolin mix but if one shot didn't do it, don't think lanolin would.

 

[trophyhunter]

Either Imperial case sizing wax or the Lee sizing wax in the 2oz tubes will make that go much easier for you.

 

[Pin]

I totally forgot about case was, thanks will try that tonight