Had to share my recent good fortune.
A friend recently told me about a elderly gentleman that was going to sell off his reloading equipment. After a few attempts, I was able to make contact with the gentleman and go look at the equipment.
Here is what I ended up buying.
Complete, three year old Dillon 550B press (w/ custom made cover)
Dillon Terminator 1200 digital scale
Dillon carbide .38/.357 three die set
Dillon .38/ 357 caliber conversion kit
RCBS 9mm die set
Dillon 9mm caliber conversion kit
RCBS .44 mag/.44 special die set
RCBS .45 ACP die set
Dillon .45 ACP caliber conversion kit
8 extra primer pick up tubes/ extra tips
RCBS case trimmer
RCBS beam scale
Lyman No. 55 powder measure (the older orange one)
MEC 700 Versamec shot shell loader
750 pieces of .38 Special brass
250 pieces of .357 brass
400 pieces of .45 ACP brass
240 - .38/.357 cast bullets
200 - .452" bullets
250 - 12 gauge hulls
12 pounds of HS-6 powder
8 pounds of Winchester 296 powder
ALL FOR $450
A friend recently told me about a elderly gentleman that was going to sell off his reloading equipment. After a few attempts, I was able to make contact with the gentleman and go look at the equipment.
Here is what I ended up buying.
Complete, three year old Dillon 550B press (w/ custom made cover)
Dillon Terminator 1200 digital scale
Dillon carbide .38/.357 three die set
Dillon .38/ 357 caliber conversion kit
RCBS 9mm die set
Dillon 9mm caliber conversion kit
RCBS .44 mag/.44 special die set
RCBS .45 ACP die set
Dillon .45 ACP caliber conversion kit
8 extra primer pick up tubes/ extra tips
RCBS case trimmer
RCBS beam scale
Lyman No. 55 powder measure (the older orange one)
MEC 700 Versamec shot shell loader
750 pieces of .38 Special brass
250 pieces of .357 brass
400 pieces of .45 ACP brass
240 - .38/.357 cast bullets
200 - .452" bullets
250 - 12 gauge hulls
12 pounds of HS-6 powder
8 pounds of Winchester 296 powder
ALL FOR $450
Last edited: