NWI INDIANA GUN OWNERS. #24 Lets face it we all love to shoot and eat

[2A_Tom]

So I don't have to look at jedi's avatar.

 

[jedi]

Evil evil tom!

 

[CTC B4Z]

Wtf

 

[d.kaufman]

And here we go

 

[jedi]

Wtf

U slow and old...

Now post your pink!

 

[sadclownwp]

Jedi it is an H&K FP6. With inline flashlight under the barrel.

 

[CTC B4Z]

NORTHWEST INDIANA INDIANA

 

[jedi]

NORTHWEST INDIANA INDIANA

FTFY

 

[CTC B4Z]

 

[CTC B4Z]

Key points.

Vent is angled, don't know why, but directions said to.
No drip line since it's residential install and has inducer motor. Again no idea why.

Wiring is temp, just wired to a 3 prong.

Single wall vent with inner and out wall thimble.

Propane fed from a 100 lbs tank and dual regulator.

Ratchet strap was used so I could install this myself. I lifted it up and walked into ladder, fed it through the strap then ratcheted it up to the braces.

 

[darkkevin]

I desperately need to trench a gas line to my shop so I can add one of those. Warms up quick with the propane heater but the floors and tools are still cold. Of course with the new Nipsco rates I’m not sure how badly I need to keep it warm in there too

 

[jedi]

OMG Becky!

Exposed electrical.
jedi is unsure if the gas is "valid" either with the flex.

 

[CTC B4Z]

This s only a 1.5 car garage with horrible insulation. I actually think it was just a gazebo at one point.

 

[CTC B4Z]

I desperately need to trench a gas line to my shop so I can add one of those. Warms up quick with the propane heater but the floors and tools are still cold. Of course with the new Nipsco rates I’m not sure how badly I need to keep it warm in there too

Trenching is easy and cheap. Just don't cut through wiring like I did.

 

[CTC B4Z]

OMG Becky!

Exposed electrical.
jedi is unsure if the gas is "valid" either with the flex.

We are Newton. You cannot expect much more.

 

[jedi]

We are Newton. You cannot expect much more.

Wait??
U r now in Newton county?

When did you move?
Where you not in just south of Saint snob before???

 

[CTC B4Z]

 

[Creedmoor]

Key points.

Vent is angled, don't know why, but directions said to.
No drip line since it's residential install and has inducer motor. Again no idea why.

Wiring is temp, just wired to a 3 prong.

Single wall vent with inner and out wall thimble.

Propane fed from a 100 lbs tank and dual regulator.

Ratchet strap was used so I could install this myself. I lifted it up and walked into ladder, fed it through the strap then ratcheted it up to the braces.

You might want to hard pipe that line through the wall.
I dont believe running flex through a wall is code.
And run three screws through each double wall connection.

 

[CTC B4Z]

Wait??
U r now in Newton county?

When did you move?
Where you not in just south of Saint snob before???

I lived with my mom from 2002 til 2014 in st john.

Then I grewed up and bought the ranch in Newton County in 2014

 

[CTC B4Z]

You might want to hard pipe that line through the wall.
I dont believe running flex through a wall is code.

Yup. That's the plan.

Trust me this is just to get this garage useful for the rest of the season. We had a minor 911 situation and need warm storage for a few things. Spring time all of this will be revised.