I finally got to ECPR on Saturday and got to try out the new conversion barrel out and give it a ride. It's been sitting in my range bag for months!
I have the Lone Wolf .40 to 9mm conversion barrel for my 3rd generation Glock 23. I used a new 15 round Glock factory 9mm magazine (for the Glock 19). These are the only things I did to shoot the 9mm, I did NOT change out the extractor or anything else.
I shot 100 rounds of WWB 9mm.
0 failures of any type. No FTF's or FTE's.
I shot 2-handed only, not very fast and my groups were about 6" maximum at 21 feet.
The barrel is very accurate (more than me).
It does eject the brass more towards the shooter than to the right as I had a few hit me in the right arm and a few eject directly back at me and hit the brim of my INGO cap. I've read about this with conversion barrels. (I recommend you wear a cap if using a conversion barrel).
I inspected about 10% of the brass and saw no bulges on the casing but did notice a mark on each at the base where I think the extractor is grabbing on to the casing.
All in all I am very pleased and would recommend this barrel.
Hope this helps,
FG12351
I have the Lone Wolf .40 to 9mm conversion barrel for my 3rd generation Glock 23. I used a new 15 round Glock factory 9mm magazine (for the Glock 19). These are the only things I did to shoot the 9mm, I did NOT change out the extractor or anything else.
I shot 100 rounds of WWB 9mm.
0 failures of any type. No FTF's or FTE's.
I shot 2-handed only, not very fast and my groups were about 6" maximum at 21 feet.
The barrel is very accurate (more than me).
It does eject the brass more towards the shooter than to the right as I had a few hit me in the right arm and a few eject directly back at me and hit the brim of my INGO cap. I've read about this with conversion barrels. (I recommend you wear a cap if using a conversion barrel).
I inspected about 10% of the brass and saw no bulges on the casing but did notice a mark on each at the base where I think the extractor is grabbing on to the casing.
All in all I am very pleased and would recommend this barrel.
Hope this helps,
FG12351
