Things to do on a cold winter day

[fordfarmboy]

Lots of shooting today ,I have my own in door range. 30 feet with a BB gun , saving ammo put target over a 5 gallon bucket for catcher

 

[churchmouse]

View attachment 124788 Reading this. Much better than the movie.

It has to be much better than the movie. It has to be.

 

[SnoopLoggyDog]

It has to be much better than the movie. It has to be.

Only reason to watch the movie.

 

[red_zr24x4]

I snow blowed the drive again today
Then I ran over to North Liberty to figure out what was wrong with my kids truck. Got it home for him, driveshaft carrier bearing went out, had him drive it home (1/2 mile) he's getting one tomorrow, don't know if I'll help change it or not

 

[foszoe]

Walked the GSD around the property. Looked up what a driveshaft carrier bearing is.

 

[churchmouse]

View attachment 124871
Only reason to watch the movie.

Yes sir.

 

[churchmouse]

Walked the GSD around the property. Looked up what a driveshaft carrier bearing is.

It is a bearing that carry's the center of a 2 piece drive shaft.
I am going to great lengths to eliminate this in the resto I am doing right now.

 

[2A_Tom]

Shovel snow.
Repair recliner.
Shovel snow.
Work on portable reloading bench.
Shovel snow.
Clean brass.
Shovel snow
Remodle pantry.
Shovel snow.

 

[red_zr24x4]

It is a bearing that carry's the center of a 2 piece drive shaft.
I am going to great lengths to eliminate this in the resto I am doing right now.

We used to call them a midship bearing, Autoparts store (girl on the phone) didn't know what that was

 

[SnoopLoggyDog]

It is a bearing that carry's the center of a 2 piece drive shaft.
I am going to great lengths to eliminate this in the resto I am doing right now.

Reminds me of the 7 1/2 bearing in a J-57 jet engine. Mounted between two co-axial turbine shafts to keep them from smacking into each other.

 

[2A_Tom]

Front engine rear drive busses used to have two or three drive starts with intermediate bearings. They may still have them. It has been many years since I had that headache.

 

[churchmouse]

We used to call them a midship bearing, Autoparts store (girl on the phone) didn't know what that was

I miss a good auto parts store. You know, a really good one.

 

[red_zr24x4]

Go figure theres 3 different ones for his truck

 

[mmpsteve]

We used to call them a midship bearing, Autoparts store (girl on the phone) didn't know what that was

Back in the day, in the oil fields, we called them pillow block bearings. Ask the girl at the auto parts store if they have one of those!

.

 

[Chewie]

Back in the day, in the oil fields, we called them pillow block bearings. Ask the girl at the auto parts store if they have one of those!

.

Careful, you might get slapped!