Having trouble with sizing. Miscellaneous 9mm brass, tumbled clean. Fired from Glocks, M&Ps, 92FS and couple others. On my Dillon 550 I have run into a problem several times. It started this past Winter. Occasionally a piece of brass will get stuck in the sizing die. I have to remove the die...
Need some opinions on barrels. Assembling "building" an AR for primarily range use. Mostly bench at 100-500 yards. I'm wanting an 18" or 20" and prefer a 1:8 twist so I can shoot the 55 gr bullets I've got as well as the 5.56, heavy barrel.
Be nice to stay under $400
What brands should I...
I have been loading 308 with about 46gr of BL-C(2). Recently a friend asked me about subsonic loads for it. So I checked out Hodgdons site and they list 8.0 gr (max) Titegroup or Clays for 308, using 168 gr Sierra HPBT and OAL of 2.800" That leaves a LOT of space in the case that is filled by...
Need some help for someone new to this. I've been canoeing in these rental places but I've got more specific questions. We will be kayaking instead but similar needs.
Can I launch in any public waterway (creek, river, lake, pond)?
Relatively sure I can go from Zionsville Park to Eagle Creek...
How does Bass and Bucks work?
I've taken a look using Google Maps and see pistol and rifle lanes. Looks like. 25, 50, 100, 500 and 800 yards.
1. Can you drive to change targets on the long ranges?
2. Can you shoot steel?
3. Can you shoot prone?
4. Any problems setting up a canopy for...
Trying to find a tattoo artist around Indy. Looking for someone who will ink my daughter and myself. Must be able to do good line work, shadowing and black/grey. Skulls, Reaper, feathers, Celtic...
Who has everybody been using? What side of town and pics of work would be OK as well.
What's the possibility safely using your steel with rifles?
What I have-3/8" 10 and 12" Rounds and Squares AR500
Calber I'd be shooting-.308, 30-06, 30-30 and .223/5.56; the ammo is FMJ and HP along with some SP thrown in. All ammo is traditional with lead or polymer tip but I am curios about...
Gonna go see a friend in Louisville and would like to do some shooting. Is there a range in Louisville area (KY or IN) that works well for pistol and rifle? If there is a place for trap and sporting that would be a huge plus. Unfortunately all I have found are pistol ranges or shotgun but no...
I've read a lot of your suggestions and still did not come to a definitive conclusion. I need your help. Looking for 2 scopes.
1. Rem 700 in .308-used primarily for target and maybe an occasional hunting trip. I'll probably max out at 600 yards but most often will be 300-500. And put a $500 cap...
Digest version-lady friend is wanting to get her first gun for protection/carry. Average size and strength. I have taken her shooting before and gone over basics and just looking for a recommended list of what to check out. She has shot Glocks and 1911s and Berettas and struggles with racking...
I have looked and looked. Tired of looking and I'm hoping someone can steer me in a good direction. I'm looking for a good pair of hiking boots. Something that is water proof !and non-insulated. I have found a few with decent reviews but they are all made in China or Vietnam and I'm trying to...
A coworker of mine just called and told me that 2nd Amendment in Whitestown has DPMS ARs for $616 (he's pretty sure that's what the price was). I've got 3 lowers that still need built but for the price are these a decent gun? I think he said flattop and obviously no optic but appear to be a good...
I'm finally to the point where I'll be reloading 222, 223 and 308. Used often enough to justify the purchas of the press and dies so that I can tailor the loads to specific guns. I've been using Lee dies for pistols but need all the updated info and suggestions/opinions on rifle set ups. I'll...
I am in need of brass. I need a few thousand 9mm, a few thousand 45ACP, a thousand 223/5.56 and a couple hundred 222. I am at the NW corner of I-465 in zip code 46077 Zionsville. Whatcha got and how much? I have some factory ammo to swap with if it's a FTF deal if you would prefer. PM me a price...
WTT: Glock 30 for a Glock 36. Would consider Gen 2 and 3 17s, 19s and 34s if the deal is right. Must be stock-no stippling or grip shortening. Maybe a Rem 700 SPS Varmint.
NW corner of 465, let's keep it kinda close.
Must be same condition. I have the plastic case, 2 mags and about 100 rounds...
Got bored and checked to see if anybody had components. Powder Valley has several Berrys Bullets in stock as well as CCI primers in Mag and APS strips.
Looks like GSSF will be back this year. July 19-20 in Atlanta. I've not been to that range yet, but I think I better get up that way soon. Membership or public?
Anybody local carry a quality hex key wrench set that is a permanent T-handle style? Trying to find 1/16" but would like to have 1/16-1/4".
Ran into an issue putting a plastic Magpul trigger guard on that uses a 1/16" hex to install the rear set screw. I had to borrow one to put it in and that...
Trying to find a barrel and I don't seem to be having any luck. So I turn to the wisdom of INGO.
What I am looking for is a 16" barrel for an AR chambered in 9mm. I want a 1:14 twist rate and the kicker is a 1/2x28 threaded muzzle.
I have found several 1/2x36 in 1:14 or 1/2x28 in 1:10. I'm not...