I need an AR15 trigger to work on. I will pay $15 (by paypal) for the trigger. I don't need the spring or pin or dis-connector. I just need the trigger.
It must NOT have been filed, ground, or polished, because that is what I want to do. :popcorn:
I can send you the payment and you can send...
I have an A2 Buffer tube with the spacer and screw. The buffer tube is a little scratched but in excellent working conditon.
I DO NOT have an extra buffer or spring.
I will trade the buffer tube for an AR15 trigger. It can even be gently used, but must not be ground on.
If you are...
I tried my Dremel on an old AR15 trigger and I swear it removed steel without even putting any polishing compound on the felt.
Is this possible (or maybe I just didn't notice it before I buffed the trigger) ? :dunno:
louielouie:popcorn:
Thank you to everyone. :rockwoot::rockwoot:
I ordered some jewelry's rouge to use as a polishing agent.
I must admit I have used toothpaste to clean a very dirty bore on pistols.
After about 2 passes the toothpaste begins to dry out and as it does it really pulls the fouling out. I just...
Are there any dentists or informed members who might know what grit normal toothpaste might be? :popcorn:
I am thinking of polishing some parts of my AR and wonder if I need to buy a special grit or if I can just give toothpaste a try.
My last issue of Shotgun News had an article that...
.223 DAG Blanks want to go to far into the chamber? Thoughts?
I bought a few boxes of the DAG 5.56x45 blanks that are currently being sold by AMMOMAN and others. It is a plastic case with the head of the case being metal.
I am having trouble with the blanks wanting to locate too far into the...
PSA has :
Winchester 5.56 40gr Jacketed Frangible 20rds USA556JF
for $11.99 per box and very reasonable shipping.
I bought 140 rounds and the shipping and handling was $7.
louielouie
nineball481,
The best way to start reloading is to start with fired brass that you have saved from the range. If you have some good brass (once- fired cases) then you should be able to get 4-5 reloads out of each one.
This way you start to learn reloading the way it usually starts and that...
PSA has:
Winchester 5.56 40gr Jacketed Frangible 20rds USA556JF
in stock for $11.99 for 20 rds. I just bought 7 boxes and shipping and handling was only $7. That's 64 cents a round delivered to my door. Here is the ammo.
Winchester 5.56 40gr Jacketed Frangible 20rds USA556JF - .223/5.56mm -...
I just bought 8 boxes of Remington UMC .223 55gr. ammo with 20 rounds to a box for $9.99 a box.
Not backordered but IN STOCK!!!! :rockwoot:
www.basspro.com
I have been searching for days for a decent "in stock" price and this is by far the best I have found per box.
I have...
I can't believe the response. The Bolt Carrier Group sold to:
Menace67
by private message as soon as I posted it.
Sorry guys, I will let you know if the deal doesn't go through.
Thanks for looking,
louielouie
SOLD, SOLD and SOLD
This is new. I only had it in my rifle long enough to cycle it a couple of times. It has never been used to fire a round.
I did some checking before I bought it new and found out that the YHM BCG is made by Stag and Stag is a mil-spec supplier.
I bought this BCG when...
I bought a couple of fossils for my grandson and they are really dry.
Can I coat them with polyurethane or what can I seal them with to make them easier for kids to handle.
Some sealant that will protect the fossil on the surface and keep the kids from getting the fossil "dust" all over...
Here is where I found step by step instructions plus photos to do my first, second and third Saiga conversions.
Saiga Conversion
Do it yourself and learn a lot,
louielouie
mvician,
When you buffed your NiB BCG did you use Flitz or any kind of polish or did you just use a cleaning buffing cloth?
When you applied the Frog Lube did you heat the BCG first?
Thanks,
louielouie