THE CZickness LII....Autumn or Fall? No matter...season is right for a CZ!

[MindfulMan]

Hey-O gangsters ! Top of the morning.
I'm back from the cabin. I thought about staying down there for this entire week, as it's another hard-to-get-old scenario (TJ will like this !). Yeah, it's Doctor, and Dentist week ... again.

Today, I'll try to clear my mind of the unpleasantness, and go through my Autumn photos.

 

[MindfulMan]

I've recently become a CZ fan. I currently have a P-10c with a Holosun EPS Carry 6 MOA green dot and most recently a P-01. Both are superb!

Have any of you had your slides milled for an optic, and if so any recommendations? I can shoot my stock P-01 pretty well at the moment but I'm getting old enough that the front sights on all my pistols are becoming increasing difficult to see clearly. Thus, my move to red dots. Honestly, I hate the idea of milling the slide of the P-01. It's such an aesthetically nice pistol stock but I'm considering adding a red dot to it as well.

Welcome to our little haven, bogus. I'm not technical enough to answer your question, but I'm sure that others who are, will be along soon.

 

[T-DOGG]

I've recently become a CZ fan. I currently have a P-10c with a Holosun EPS Carry 6 MOA green dot and most recently a P-01. Both are superb!

Have any of you had your slides milled for an optic, and if so any recommendations? I can shoot my stock P-01 pretty well at the moment but I'm getting old enough that the front sights on all my pistols are becoming increasing difficult to see clearly. Thus, my move to red dots. Honestly, I hate the idea of milling the slide of the P-01. It's such an aesthetically nice pistol stock but I'm considering adding a red dot to it as well.

Morning. You're gonna fit right in here. Red dots are very prevalent in this group.

 

[Born2vette]

Hey-O gangsters ! Top of the morning.
I'm back from the cabin. I thought about staying down there for this entire week, as it's another hard-to-get-old scenario (TJ will like this !). Yeah, it's Doctor, and Dentist week ... again.

Today, I'll try to clear my mind of the unpleasantness, and go through my Autumn photos.

Good thoughts ourgoing!

 

[Born2vette]

I've recently become a CZ fan. I currently have a P-10c with a Holosun EPS Carry 6 MOA green dot and most recently a P-01. Both are superb!

Have any of you had your slides milled for an optic, and if so any recommendations? I can shoot my stock P-01 pretty well at the moment but I'm getting old enough that the front sights on all my pistols are becoming increasing difficult to see clearly. Thus, my move to red dots. Honestly, I hate the idea of milling the slide of the P-01. It's such an aesthetically nice pistol stock but I'm considering adding a red dot to it as well.

Welcome to the CZickness! If you are asking where to get your P-01 milled @AllenM in Avon does nice work. He milled my Rami for direct mount Holosun 507k. I am considering getting my PCR milled as well and the EPS carry circle dot is on my short list.

 

[patience0830]

Dang….if I didn’t already have a SS p220….

Had one. Not my thing.

 

[patience0830]

I've recently become a CZ fan. I currently have a P-10c with a Holosun EPS Carry 6 MOA green dot and most recently a P-01. Both are superb!

Have any of you had your slides milled for an optic, and if so any recommendations? I can shoot my stock P-01 pretty well at the moment but I'm getting old enough that the front sights on all my pistols are becoming increasing difficult to see clearly. Thus, my move to red dots. Honestly, I hate the idea of milling the slide of the P-01. It's such an aesthetically nice pistol stock but I'm considering adding a red dot to it as well.

Welcome to our world!

 

[zachcz]

I've recently become a CZ fan. I currently have a P-10c with a Holosun EPS Carry 6 MOA green dot and most recently a P-01. Both are superb!

Have any of you had your slides milled for an optic, and if so any recommendations? I can shoot my stock P-01 pretty well at the moment but I'm getting old enough that the front sights on all my pistols are becoming increasing difficult to see clearly. Thus, my move to red dots. Honestly, I hate the idea of milling the slide of the P-01. It's such an aesthetically nice pistol stock but I'm considering adding a red dot to it as well.

I have a plate that replaces rear sight thst is rmr pattern. Had Holosun on one of my p01s. Easy way to see if you like optic on it without milling or confirming you do like it and then send it off to get milled. If you want it milled locally I would recommend Allen. I see you’re in Columbus. I’d also recommend checking out USDS Bloomington. Owner is only person I would ever let work on any of my CZs also does best cerakote I’ve seen in person.

 

[bogus]

Welcome to the CZickness! If you are asking where to get your P-01 milled @AllenM in Avon does nice work. He milled my Rami for direct mount Holosun 507k. I am considering getting my PCR milled as well and the EPS carry circle dot is on my short list.

Thank you! That's exactly what I was asking.

 

[bogus]

I have a plate that replaces rear sight thst is rmr pattern. Had Holosun on one of my p01s. Easy way to see if you like optic on it without milling or confirming you do like it and then send it off to get milled. If you want it milled locally I would recommend Allen. I see you’re in Columbus. I’d also recommend checking out USDS Bloomington. Owner is only person I would ever let work on any of my CZs also does best cerakote I’ve seen in person.

That's an excellent idea! Thank you for noting the plate. I was recently in USDS in Columbus, they mentioned that their Bloomington location is a big fan of CZ.

 

[zachcz]

That's an excellent idea! Thank you for noting the plate. I was recently in USDS in Columbus, they mentioned that their Bloomington location is a big fan of CZ.

That would be putting it mildly!

 

[Bennettjh]

I've recently become a CZ fan. I currently have a P-10c with a Holosun EPS Carry 6 MOA green dot and most recently a P-01. Both are superb!

Have any of you had your slides milled for an optic, and if so any recommendations? I can shoot my stock P-01 pretty well at the moment but I'm getting old enough that the front sights on all my pistols are becoming increasing difficult to see clearly. Thus, my move to red dots. Honestly, I hate the idea of milling the slide of the P-01. It's such an aesthetically nice pistol stock but I'm considering adding a red dot to it as well.

Welcome from Columbus, and to the CZ fold.

AllenM does a lot of work for INGO such as optic cuts, etc.

 

[88E30M50]

I'll add another recommendation for AllenM. He's milled a couple of my slides and the results have been perfect. The work done on my G23 is so good, I think that I could shoot the gun without screws holding the RMR down. Yet, when lined up just right, the sight drops into the perfectly milled pocket with little resistance.

 

[MindfulMan]

I wanted to share a few of my favorite photos from this weekend. This is our 11th Autumn at the cabin.

 

[88E30M50]

Great photos MM. Number 3 and 6 are my favorites. I wish that I had your eye for composition

 

[88E30M50]

I'm not sure that I've stepped outside of the Czickness thread in a month now. This thread seems to attract genuine decent folks. Or, more accurately, it repels the simple minded yahoo's that seem to linger elsewhere.

 

[gmcttr]

We bore them to death with coffee.

 

[MindfulMan]

Great photos MM. Number 3 and 6 are my favorites. I wish that I had your eye for composition

 

[wtburnette]

Sat in the back yard watching the cat chase grasshoppers while sipping mixed drinks until the yard was full of shade. Inside for the rest of the evening.

 

[88E30M50]

Sat in the back yard watching the cat chase grasshoppers while sipping mixed drinks until the yard was full of shade. Inside for the rest of the evening.

Sounds like a decent use of the evening