The dillon with case feed will run 784
The LNL with case feed will run 757 (from midway so Im sure it can be cheaper but 429 for the press and 329 for the case feed)
Obviously you get some free bullets, but the hornady LNL case feed is 130 bucks more than dillons (assuming Im reading right)
Ease of caliber conversion adds up in costs quickly. If you want to use the powder through expanders and not have to change and set them up each time you change over, that adds up. You can buy extra quick change case activated powder drop lowers for $25 so you don't have to reset it every time you change.
.
I think you will find componets as high and hard to find as ammo. At least it is in my area.A little preface. Ive been precision loading for years on a forster coax. Its slow and precise and on certain rounds I couldn't care less about speed all I care about is prefection.
About 2 years ago I decided to try progressive reloading. I bought a dillon 650 with case feed. I had owned it for a year or so and only loaded a few hundred rounds. I had issues with the press and spent alot of time on the phone with dillon (they were more than helpfull and sent me all the fix parts for free every time I have absolutly no complaints). By the time I got it working right I was already flusterated with the whole progressive reloading and had pretty much decided progressive reloading was not for me and decided since I only shoot a 5000ish bulk rounds a year I could buy them easier than make them and sold the press before I really got a chance to learn it well.
Now with ammo hard to find recently I have decided to re visit the issue. I believe the ability to make my own bulk ammo in a hurry is a option I would like to have in the future. When I tried progressive reloading it was very rare that I had a full hour to sit down and make ammo wich is not very fruitful. Now I have a little more time to sit down and get it right.
So on to my question. First of all im not looking for "red is the best because thats what I have and like" or "blue is the best because thats what I have and like" What I am looking for is "I have used both options, I like x about this and y about that but my favorite is ___"
I will say even though I never fully got the swing of my Dillon im kind of leaning that dirrection because Im a stickler for customer service and Dillon was outstanding. Another reason Im leaning towards Dillon is I kept my press for a couple years and really didnt lose alot on the resale.
I believe Profire arms is a dealer of both and they will get my business, Im just trying to figure out wich check to write.
I think you will find componets as high and hard to find as ammo. At least it is in my area.
I have most of the componenets laying around to make up 6000ish rounds.
Just a update, Im going to give the Hornady a shot
Where did you end up finding it and for how much?
Word of caution. If you buy shellplates, make sure they're for ez eject. I bought my press long before the ez eject came out. I recently bought the ez eject conversion kit and just now got around to sending my shellplates into Hornady to convert them. Just got a phone call that it'll take 5-7 weeks.
What plates do you need? I have some extra ones from my last purchase. Be glad to loan you some if I have what you need.
I am the proud owner of 6 different Dillon presses. 3 Square Deal Bs, an RL450B that is partially converted to a 550, and 2 XL650s and should I buy another press, believe it or not, it is going to be the Hornady LNL AP.
You will not go wrong with that press. I know lots of folks that have them and they are really tickled they do. If you are going all out though, they have a bullet feeder for them too!
NOW THAT would be high speed production!
Personally, I believe if you are going to go into real progressive loading, you need that 5th station. As good as we are, we are not able to catch things as well as we think we can. That station needs to have a powder sensor in it of some kind. I use the Dillon one and it can see, depending on the powder, +/-.2gr. There are others that will actually lock up the press when they detect a powder problem. Either way, you need to have an automated system of some kind for that. Yes, looking into each case before you set a bullet is STILL paramount and consistent with good reloading priniciples BUT, things can be missed.
Good for you. Have fun, be safe.